Wondering about pipe lagging? Insulating pipes in your home is an affordable and easy DIY job to undertake if they are easily accessible. When it comes to ways to insulate your home, it is one of the simplest tasks that can help reduce heat loss.

According to Insulation Superstore, pipe insulation (on hot pipes) will prevent heat from being lost to the surrounding area. Pipe lagging will the temperature of the water around 2 degrees higher than it would be without pipe insulation. This means that less energy is required to heat the water. This, in turn, reduces the cost of your utility bills and helps to lower your home’s carbon emissions.

UK homes have a series of water pipes running through them. Lagging is the common name given to the process of insulating these pipes by covering them in insulative materials on the outside.

Image credit: Future plc/Alexander James

This is the most widely used lagging and is popular due to being affordable and easy to install. It typically comes in the form of a pipe with a slit running down one side and can be easily slipped over the outside of a pipe. ‘It can be used for a number of different applications including loft spaces to prevent pipes freezing and also central heating pipework to prevent heat loss,’ says Thomas Goodman, property and construction expert at MyJobQuote.

This type of lagging is made from elastomeric rubber and is used to prevent condensation and resist the build-up of humid environments. ‘Due to its strength and longevity, it is often used to insulate outdoor pipework, solar pipework, and any pipes that are subject to extreme temperatures,’ says Thomas Goodman.

Made of rock or mineral wool, it’s suitable for indoor or outdoor use. ‘This type of insulation is used in heating, ventilation, and air conditioning systems due to its ability to withstand extremely high temperatures,’ explains Thomas Goodman.

Pipe wrap can be made from a number of different materials, but differs from the other options on the list above as it is wrapped continuously around pipes rather than fitting over the pipe in one solid form. ‘Pipe wrap is generally much thinner than other forms of insulation so works well if space is extremely tight,’ says Thomas Goodman.

Image credit: Vladimir Zapletin / Alamy Stock Photo

If you’re already taking up flooring and removing walls to install insulation, it is worth pipe lagging at the same time and the cost of materials and labour will be relatively low.

‘It can cost anywhere between 40p and £2.50 to simulate a single pipe, depending on the materials used for the job,’ says Thomas Goodman. ‘On average, this will amount to about £20 to insulate the primary pipework in your home, and it can be done yourself without having to pay for professionals to fit it,’ he adds.

Here are the pros when you are considering how to lag pipes…

Image credit: Future PLC/ Colin Poole

Consider the downsides before starting…

There are few disadvantages when insulating pipework. However if fitting it retrospectively, this can cause some disturbance and damage to your home. For instance if you need to take up floors and walls to access the pipework.

If your home’s pipework is located under your flooring, you’ll have to take it up to be able to install the lagging. The effort of taking up flooring is not only time consuming, but can prove costly. Especially if you’re unable to re-use the existing floor covering again.

‘If you don’t have any issues with condensation or leaks to deal with, sometimes it may not be worth insulating your pipework for the small return you’ll see on your energy bills and emissions savings,’ says Thomas Goodman.